ALBUQUERQUE, NM–(Marketwired – Sep 16, 2015) – Enerpulse Technologies (OTCQB: ENPT) announced today that it has begun development of its C2 ignition system funded in part by a $749,868 grant awarded by the California Energy Commission(CEC) with Enerpulse named as prime-subcontractor. According to the CEC “ignition characteristics of natural gas fuel represent challenges to engine manufacturers working to satisfy tighter emission standards, achieve lower fuel consumption and higher engine performance.” The CEC’s stated goal is to “advance the functionality of natural gas ignition under high boost pressure and heavy EGR conditions to facilitate the development of engines with lower nitrogen oxides (NOx) and greenhouse gas (GHG) emissions.”
C2 will build upon Enerpulse’s patented plasma-assisted combustion technology, which is currently found in its commercially available Pulstar® spark plugs. Enerpulse will integrate proprietary electronic controls creating a system that increases the size and duration of the plasma field during ignition and combustion. This strategy will enable extremely reliable ignition timing and more efficient combustion of natural gas fuels than ever before possible, particularly under high boost and heavy EGR conditions.
Enerpulse is partnering with Power Solutions International (NASDAQ: PSIX) to deliver a commercially viable natural gas fueled power plant that meets the CEC’s stated objectives. Enerpulse’s C2 ignition system will be incorporated into PSI’s turbocharged 8.8-litre CNG engine, which is currently under development. In addition to turbocharging, PSI’s new engine will employ substantial amounts of cooled Exhaust Gas Recirculation (EGR) to significantly reduce emissions and improve fuel consumption. Introducing substantial amounts of cooled EGR presents significant challenges to conventional ignition systems in natural gas fueled engines, which will be addressed by C2.
“Most automotive original equipment manufacturers are already using cooled EGR in gasoline engines to meet emissions standards, but similar use of cooled EGR in Natural Gas engines has been impossible until now,” said Lou Camilli, President and Chief Technology Officer for Enerpulse Technologies. “NatGas fuels like CNG are very difficult to ignite and adding cooled EGR makes them nearly impossible to ignite with conventional ignition systems. The harder fuel is to ignite, the longer plasma must be present in the cylinder to assist combustion. Enerpulse’s C2 ignition system will increase and extend the amount of plasma generated during the ignition cycle. Enerpulse’s C2 ignition system combined with PSI’s advanced turbocharged engine with cooled EGR is the perfect combination to push this critical boundary.”
“We’re very excited to collaborate on this ambitious project and to showcase the capabilities of our turbocharged, 8.8-liter CNG engine,” said Jeremy Lessaris, PSI’s Vice President of Marketing & Communications. “The goal of the CEC is to develop a power system that advances engine performance, improves exhaust emissions and increases the economic viability of natural gas fueled engines for mid-size commercial vehicles. We believe the technologies developed for this project can help accomplish all three objectives and that there is great commercial potential for an ultra-low emission, CNG-engine platform.”
About Power Solutions International, Inc. (NASDAQ: PSIX)
Power Solutions International, Inc. (PSI) is a leader in the design, engineering and manufacture of emissions-certified, alternative-fuel power systems. PSI provides integrated turnkey solutions to leading global original equipment manufacturers in the industrial and on-road markets. The Company’s unique in-house design, prototyping, engineering and testing capacities allows PSI to customize clean, high-performance engines that run on a wide variety of fuels, including natural gas, propane, biogas, diesel and gasoline.
PSI develops and delivers complete .97 to 22 liter power systems, including the 8.8 liter engine aimed at the industrial and on-road markets, including medium duty fleets, delivery trucks, school buses and garbage/refuse trucks. PSI power systems are currently used worldwide in power generators, forklifts, aerial lifts, and industrial sweepers, as well as in oil and gas, aircraft ground support, agricultural and construction equipment.
About ENERPULSE (OTCQB: ENPT)
Enerpulse Technologies, Inc. is a publicly traded company headquartered in Albuquerque, N.M. Founded in 2004; the company develops and manufactures ultra-high performance, low emissions ignition products through the application of pulse power technology. For more information, visit www.enerpulse.com.
Safe Harbor / Forward-Looking Statements
This news release contains “forward-looking statements” as that term is defined in Section 27(a) of the United States Securities Act of 1933, as amended and Section 21(e) of the Securities Exchange Act of 1934, as amended. Information provided by the Company such as online or printed documents, publications or information available via its website may contain forward-looking statements that involve risks, uncertainties, assumptions, and other factors, which, if they do not materialize or prove correct, could cause its results to differ materially from historical results, or those expressed or implied by such forward-looking statements. All statements, other than statements of historical fact, are statements that could be deemed forward-looking statements, including statements containing the words “planned,” “expects,” “believes,” “strategy,” “opportunity,” “anticipates,” and similar words. These statements may include, among others, plans, strategies, and objectives of management for future operations, marketing and sales; any statements regarding proposed new products, services, or developments; any statements regarding future economic conditions or performance; statements of belief; and any statements of assumptions underlying any of the foregoing. These forward-looking statements are subject to risks and uncertainties that may cause actual results to differ materially, including market conditions, risks associated with the cash requirements of our business and other risks detailed from time to time in our filings with the Securities and Exchange Commission, and represent our views only as of the date they are made and should not be relied upon as representing our views as of any subsequent date. We do not assume any obligation to update any forward-looking statements.
For further information, contact:
Director of Marketing and Communications